Q-box Fiberglass Niches 4040 and 4080

Q-box Fiberglass Niches 4040 and 4080

Patented System:
Practicality Accuracy and Fast assembly.

Qbox Cinerari in vetroresina 4040 e 4070

The Q-Box is an innovative system designed and patented by Giuseppe Bosisio Srl to create pre-fabricated Niches in the cemetery in a very short time. Instead of using cement, the Niches are assembled simply and quickly using a new material with surprising features: fiberglass.

The Niches take shape by assembling 3 self-supporting structural elements in fiberglass: horizontal panel, vertical panel and cover.
Niche 4040: due to its small dimensions (40.3 × 40.3 × 43 cm) and for the reduced weight 8 kg, it can be mounted anywhere. Free space inside cm 40x40x40.
Niche 4080: for its small dimensions (40.3 × 40.3 × 84 cm) and for the reduced weight 13 kg, it can be mounted anywhere. Free space inside cm 40x40x80.

CHARACTERISTICS OF Q-BOX NICHES PREFABRICATED IN FIBERGLASS

PANEL 4040
The one-piece molded fiberglass panel used for the construction of the horizontal and vertical walls of the Niche has dimensions 37.2 x 41.9 x 3.1 cm. At the ends, along the entire length of 41.9 cm, the panel has a T-section to allow interlocking with the joint.

PANEL 4080
The one-piece molded fiberglass panel, used for the construction of the horizontal and vertical walls of the Niche, has dimensions 37.2 x 83 x 3.1 cm. At the ends, along the entire length of 83 cm, the panel has a T-section to allow interlocking with the joint.

LID
The closing lid, made of fiberglass, has dimensions 39.8 x 39.8 x 0.3cm with a grafting edge that connects the four walls of the cell, allowing them to glue and seal together. For each Niche two lids are used, one at the back and one at the front.

JOINT
The joining profile of all the fiberglass panels have the following dimensions: 3,1 x 3,1 x 41,9cm (4040) o 83cm (4080).
The “teeth” on the far end create a “clip” self-locking system in order for the structure to self position itself in a correct and aligned manner.
The central hole is equipped with a threaded bush to allow the positioning of the brackets that support the marble slabs.

SPECIFICATIONS OF NICHES IN FIBERGLASS 4040

Dimensions:
cm 40.3 x 40.3 hx 43 (in the middle) weight Kg


Panel:

The one-piece molded fiberglass panel, used for the construction of the horizontal and vertical walls of the Niche, has dimensions 37.2 x 41.9 x 3.1 cm. At the ends, along the entire length of 41.9 cm, the panel has a T-section to allow interlocking with the joint.

 

 

 

 


Joint:

The joining profile of all the fiberglass panels have the following dimensions: 3,1 x 3,1 x 41,9cm.
The “teeth” on the far end create a “clip” self-locking system in order for the structure to self position itself in a correct and aligned manner.
The central hole is equipped with a threaded bush to allow the positioning of the brackets that support the marble slabs.

 

 

 


Lid:
The closing lid, made of fiberglass, has dimensions 39.8 x 39.8 x 0.3cm with a grafting edge that connects the four walls of the cell, allowing them to glue and seal together. For each Niche two lids are used, one at the back and one at the front.

 

 

 

 

 


External Finish:

The structure is completely covered in glossy white Carrara marble, 2 cm thick or other marble/granite chosen by the supervisor.
The front gravestones in White glossy Carrara marble, 2 cm thick, are supported by the horizontal panel made in fiberglass and blocked by bronze studs of circular shape, diameter 3 cm.
The plinth in White glossy Carrara Marble, thickness 2 cm, height 10 cm, is fixed to the structure with bronze studs of circular shape, diameter 3 cm and sealed with silicone.
The vertical side panels in glossy white Carrara Marble, 2 cm thick, are fixed to the structure with round bronze studs, diameter 3 cm and sealed with silicone.
The horizontal upper infill in Glossy White Carrara Marble, thickness 2cm, is fixed to the structure with silicone.


Cover:

necessary only if the Niches are outdoors, replaces the upper horizontal infill which only has an aesthetic function.
The veil in glossy white Carrara Marble, thickness 2cm, height 10cm, is fixed to the structure with bronze studs of circular shape and diameter equal to 3 cm and sealed with silicone.
The upper cover is made of sheets of polished Serizzo, 3 cm thick, sealed with silicone.



Assembly:

made upon request by our specialized personnel, can make a few hundred cells in just a couple of days without any discomfort inside the cemetery, as no mortar, cement or welds are used and therefore no dirt, dust or dangerous conditions are created for non-professionals.

SPECIFICATIONS OF NICHES IN FIBERGLASS 4080

Dimensions:
cm 40.3 x 40.3 hx 84 (in middle) weight Kg


Panel:

The one-piece molded fiberglass panel, used for the construction of the horizontal and vertical walls of the Niche, has dimensions 37.2 x 83 x 3.1 cm. At the ends, along the entire length of 83cm, the panel has a T-section to allow interlocking with the joint.

 

 

 


Joint:

The joining profile of all the fiberglass panels have the following dimensions: 3,1 x 3,1 x 83cm.
The “teeth” on the far end create a “clip” self-locking system in order for the structure to self position itself in a correct and aligned manner.
The central hole is equipped with a threaded bush to allow the positioning of the brackets that support the marble slabs.

 

 

 


Lid:
The closing lid, made of fiberglass, has dimensions 39.8 x 39.8 x 0.3cm with a grafting edge that connects the four walls of the cell, allowing them to glue and seal together. For each Niche two lids are used, one at the back and one at the front.

 

 

 

 

 


External Finish:

The structure is completely covered in glossy white Carrara marble, 2 cm thick or other marble/granite chosen by the supervisor.
The front gravestones in White glossy Carrara marble, 2 cm thick, are supported by the horizontal panel made in fiberglass and blocked by bronze studs of circular shape, diameter 3 cm.
The plinth in White glossy Carrara Marble, thickness 2 cm, height 10 cm, is fixed to the structure with bronze studs of circular shape, diameter 3 cm and sealed with silicone.
The vertical side panels in glossy white Carrara Marble, 2 cm thick, are fixed to the structure with round bronze studs, diameter 3 cm and sealed with silicone.
The horizontal upper infill in Glossy White Carrara Marble, thickness 2cm, is fixed to the structure with silicone.


Cover:

necessary only if the Niches are outdoors, replaces the upper horizontal infill which only has an aesthetic function.
The veil in glossy white Carrara Marble, thickness 2cm, height 10cm, is fixed to the structure with bronze studs of circular shape and diameter equal to 3 cm and sealed with silicone.
The upper cover is made of sheets of polished Serizzo, 3 cm thick, sealed with silicone.



Assembly:

made upon request by our specialized personnel, we can make a hundred cells in just a couple of days without any discomfort inside the cemetery, as no mortar, cement or welds are used and therefore no dirt, dust or dangerous conditions are created for non-professionals.

Information?