Q-box Fiberglass Cineraries 3030

Q-box Fiberglass Cineraries 3030

Patented System:
Practicality Accuracy and assembly speed.

Cinerari in vetroresina 3030

The Q-Box is an innovative system designed and patented by Giuseppe Bosisio Srl to create pre-fabricated cineraries in the cemetery in a very short time. Instead of using cement, the ossuaries are assembled simply and quickly using a new material with surprising features: fiberglass.

The cineraries take shape by assembling 3 self-supporting structural elements in fiberglass: horizontal panel, vertical panel and cover.
Due to its small size (32.5 × 32.5 × 36 cm) and light weight 6.6 kg, it can be mounted anywhere. Internal free space 30x30x30 cm.


cm 32.5 x 32.5 x 36 (width x height x depth).Internal free space 30x30x30 cm.

Each cinerary weighs about 6.6 kg

Anti-seismic structure, waterproof , resistant to salt fog

The structure is self-supporting and is fixed to the ground with steel screws and dowels

White Carrara Marble series; request any marble or granite

Thanks to its small size and to the practical interlocking system, it can be mounted anywhere: in a stairwell, in narrow corridors, chapels and even outdoors

It allows 2 people to install 100 cineraries in 2 days, without any discomfort in the cemetery, as they do not use mortar, cement or welds and therefore do not produce dirt, dust or dangerous conditions for visitors to the cemetery.

40 Q-Boxes without marble weigh 305 kg and are transported on a pallet measuring 80x120x120 cm


Dimensions: 32.5 x 32.5 x 36 cm (center line) weight 6.6 kg . Internal free space 30x30x30 cm.

Horizontal panel: the horizontal fiberglass panel, used for the construction of the urn support shelf, has dimensions 31.5 x 36 x 2 cm, weight 1.3 kg. At the ends, the panel has a U-shaped section to allow interlocking with the vertical panel.

Vertical panel: the vertical fiberglass panel has dimensions 33 x 36 x 2 cm , weight 1.4kg. The “teeth” on the ends of the profile uses a self-locking system called “clips” that allow the structure to be positioned and have a correct self-alignment. The central hole is equipped with a threaded bush to allow the positioning of the supporting studs of the marble slabs.

Lid: the fiberglass cover, used for the rear closure and as a front seal, has dimensions 31.5 x 32 x 2 cm , weight kg 1. It is equipped with a hole for the passage of the electric cable and handle to facilitate the opening of the cinerary.

External Finish: The structure is completely covered in glossy white Carrara marble, 2 cm thick or other marble/granite chosen by the supervisor.
The front gravestones in White glossy Carrara marble, 2 cm thick, are supported by the horizontal panel made in fiberglass and blocked by bronze studs of circular shape, diameter 3 cm.
The plinth in White glossy Carrara Marble, thickness 2 cm, height 10 cm, is fixed to the structure with bronze studs of circular shape, diameter 3 cm and sealed with silicone.
The vertical side panels in glossy white Carrara Marble, 2 cm thick, are fixed to the structure with round bronze studs, diameter 3 cm and sealed with silicone.
The horizontal upper infill in Glossy White Carrara Marble, thickness 2cm, is fixed to the structure with silicone.

Glass: the aluminum and glass closing panel is equipped with keys for personal management of the cell. Dimensions 32 × 32cm, weight 2kg. This solution, replacing the traditional marble, allows you to insert personal items together with the urn of your loved one.

Assembly: made upon request by our specialized personnel, can make a few hundred cells in a couple of days without any discomfort inside the cemetery, as no mortar, cement or welds are used and therefore no dirt, dust or dangerous conditions are created for non-professionals.