Q-Box Couch Crypts in Fiberglass

Q-Box Couch Crypts in Fiberglass

Q-Box prefabricated Couch Crypts take shape by assembling 3 structural elements in fiberglass: panel, side panel and cover.
They are self-supporting and are fixed to the ground with fiberglass pins.

The 3 fiberglass structural elements have been designed in such a way as to simplify the interlocking assembly and guarantee the sealing that makes each crypts watertight.

The interlocking mounting system allows aligned positioning, correctly and safely. The fiberglass structure is completely covered in marble. The final result is excellent both from a structural and an aesthetic point of view.

SPEED AND FACILITY OF MOUNTING

The installation of the Q-box Couch Crypts, carried out on request by our specialized staff, allows to create in one hundred days a hundred loculi without any discomfort within the cemetery, as no mortar, cement or welds are used and therefore not they produce dirt, dust or dangerous conditions for non-professionals or other workers.

SPECIFICATIONS

Couch Crypts: 232cm x 73h x 83,5 weight 70 kg, capacity 250 kg/mq internal free space complying with Regulation 24/6/93 n. 24.

 


Horizontal panel of the tank
: the fiberglass panel, used for the construction of the base of the Couch Crypts, has dimensions 75 x 231 x 3 cm . At the ends, along the entire length of 231 cm, the panel has a U-section to allow interlocking with the joint. The panel is a tank that gives the structure the inclination of 2% and guarantees the collection of liquids (50 liters) as it is molded in one piece.

 

 

 


Rear vertical panel
: the one-piece molded fiberglass panel, used for the construction of the vertical walls of the cell, has dimensions 70.5 x 231 x 3 cm . At the ends, along the entire length of 231 cm, the panel has a U-shaped section to allow interlocking with the joint.

 

 

 

 

Joint: The joining profile of all the fiberglass panels have the following dimensions: 8 x 8 x 231 cm.
The “teeth” on the far end create a “clip” self-locking system in order for the structure to self position itself in a correct and aligned manner. The furrows on the bottom collect the structural glue that is used for the making of the structure and sealing of all the joints.
The central hole is equipped with a threaded bush to allow the positioning of the brackets that support the marble slabs.

 

 

 

Side panel: the side panels, made of fiberglass, of dimensions 77 x 72 x 3 cm have a grafting edge that connects the four walls of the cell, allowing them to glue and seal together.
For each cell two lids are used, one on the left and one on the right, both structurally collaborating with the system.

 

Frontal closing cover: The closing cover, made of fiberglass, has dimensions 217 x 65 x 3cm with a grafting edge that connects the four walls of the cell, allowing them to glue and seal together.

 

 

 

External Finish: The front structure is completely covered in glossy white Carrara marble, 2 cm thick.
The front slabs in glossy white Carrara Marble, 2 cm thick, are fixed to the structure and supported by round-shaped bronze studs with a 6 cm diameter with a cross-shaped fiberglass structure, anti-tipping washer 8MAx120 stainless steel pin and nut.
The upper veil in glossy white Carrara marble, and the side panels in glossy white Carrara marble, dimension to size, thickness 2 cm, are fixed to the structure with bronze studs of circular shape, 6cm in diameter and sealed with silicone. The plinth in White glossy Carrara marble, thickness 2 cm, height 10 cm, is fixed to the structure with bronze studs of circular shape and a diameter of 6 cm, sealed with silicone.

Cover: the cover is made with self-supporting panels in double sheet metal, pre-painted in greyish white and tinsel in aluminium, pre-painted dark brown with a front jut.. The cover is complete with gutters and downpipes.

COUCH CRYPTS COVERINGS

Arche curved cover prepainted in greyish white with an aluminium sheet prepainted in dark brown. Gutter channel Perimeter juts out 15 cm.

Cover in self-supporting double-sheet panels prepainted in colour greyish white, aluminum tinsmiths pre-painted dark brown, front jutting out from 20 to 100 cm, for those that jut out more than 100cm support pillars are needed.

Transparent alveolar polycarbonate cover or bronze cover with metallic structure, prepainted dark brown, front jutting out from 50 to 100 cm, for those that jut out more than 100 cm, support pillars are needed.

Independent cover with metalic structure, pre-painted dark brown. Light zone in a low-arched alveolar polycarbonate, jutting out 200 cm.

Information?